+8618117273997weixin
EnglishEnglish
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語
Home Products IEC 60884-1 Clause 14.2 Figure 17 Non-solid Pins Testing Device
IEC 60884-1 Clause 14.2 Figure 17 Non-solid Pins Testing Device IEC 60884-1 Clause 14.2 Figure 17 Non-solid Pins Testing Device
IEC 60884-1 Clause 14.2 Figure 17 Non-solid Pins Testing Device IEC 60884-1 Clause 14.2 Figure 17 Non-solid Pins Testing Device

Leave a Message

=

IEC 60884-1 Clause 14.2 Figure 17 Non-solid Pins Testing Device

Product No: LS-B04

  • Specifications
  • Videos
  • Applications
  • Standards

  • The LS-B04 IEC 60884-1 Clause 14.2 Figure 17 Non-solid Pins Testing Device is a specialized instrument designed to test the mechanical strength of non-solid pins. The device uses a rigid component to apply a perpendicular force to the surface of the non-solid pin in a specific manner. After maintaining this force for a set time, the deformation of the pin is observed and measured to determine whether it possesses sufficient hardness and structural stability. This ensures that the pin can withstand the corresponding mechanical stress in actual use and meets the structural reliability requirements during operation.

    Standards:

    Standards Standards Name
    IEC 60884-1:2022  Plugs and socket-outlets for household and similar purposes – Part 1: General requirements
    VDE 0620-2-1:2021  Connectors for household and similar purposes – Part 2-1: Particular requirements for plugs
    GB/T 2099.1-2021 家用和类似用途插头插座 第 1 部分：通用要求

    Specification:
    • Steel rod: Φ4.8mm
    • Weight: 100N
    • Manual rotary handwheel for applying pressure to the pin

    Test Method: A Φ4.8mm steel rod with a 100N load is pressed perpendicularly to the axis of the non-solid pin for 1 minute. The deformation at the point of pressure must not exceed 0.15mm, and the dimensional change of the pin must not exceed 0.6mm. This method is used to determine if the non-solid pin has sufficient hardness.

    IEC 60884 1 Figure 17

    Tags：

  • Cable and Wire Test Solutions

    LISUN's cable and wire test solutions are essential for verifying compliance with international...

  • IEC 60502-1:2021 has been prepared by IEC technical committee 20: Electric cables. It is an International Standard. This third edition cancels and replaces the second edition published in 2004 and...
    This Standard CEI 23-50 applies to plugs, fixed or mobile socket-outlets and extension cords for alternating current only, with or without earth contact, with a nominal voltage exceeding 50 V but not...
    IEC 60884-1:2022 applies to plugs and fixed or portable socket-outlets for AC only, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated...